Foshan Summey Metal Products Ltd
Foshan Summey Metal Products Ltd Phone/WhatsApp/Wechat: 86--15989979982
Add to Cart
Powder Coating White Aluminum Door Frame Extrusions / Sections / Profiles / Panels
Aluminum Extrusion Profiles process:It will be passed through a number of mechanical processes that are designed to give the metal its desired shape. These processes include: rolling, drawing, forging, spinning, piercing and extrusion.
Aluminum door frame extrusions:
Regardless of whether aluminium has been found in its molten or solid form, the manufacturer will then pass it through either a hot working or cold working process to prepare it for their customers. When using the hot working process (the most popular of the two), a billet will be heated to a temperature of over 79 degrees Celsius, which will allow the aluminium to be easily distorted and placed into its desired shape.
The reason for the popularity of the hot working process over the cold working one can be fully realized when you compare aluminium extrusion to squeezing toothpaste out of its tube. It is much easier to extrude the metal when it is malleable, meaning that it must have been heated to a certain temperature.
Finally, the aluminium will pass through an extrusion and drawing process that runs almost parallel to each other. This is the final step in the whole extrusion process and is the step that gives the metal its entire shape.
Competitive Advantages:
Automatic digital control anodized production lines with advanced anodizing formula creates the even surface and control the anodized thickness within 8 to 12μm. The precision is much better than manual operation.
Cost: The whole production lines are adopted, produces the products begin from aluminum ingot, minimize the cost from every single step.
Quality: The modern management and advanced equipments create the stable and super quality.
E.G: The most advanced aluminum rod homogenizing furnaces are adopted to make the aluminum rod more stable.
Service: Any request will be replied within 24 hours, Local office in Mexico, Colombia and Canada, no communication problem, no time difference problem.
Specifications of Aluminum Door Frame Profiles:
1) aluminum profile material: AL6063 or 6061 or 6005 or as per customers' need.
2) Temper:T4,T5,T6
3) Surface Treatment: mill finish(without treatment),anodizing, electrophoresis, power coating (any color),
fluorocarbon coating(PVDF coating),wood grain painting, drawbench, sand blasting etc.
4) Length: the maximum is 7 meters; usually 5.5 to 5.8 meters.
5) Packing: Kraft paper, carton box, protection foam heat contracted plastic film, poly-bag, etc.
6) Certificates:ISO 9001:2000,ISO 14001:2004
| Aluminium Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.49 | 0.1 | 0.1 | 0.1 |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.6-1.2 | 0.04-0.35 | 0.25 | 0.15 |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | 0.15 | 0.1 |
You can also get these advanced conditions below:
More than 400 types moulds are adopted, can meet almost all kinds of design in South American market.
Good Quality Control, CE, ISO certificates approved.
Fast Delivery, Only 15 Days which is not easy achieve for other factory in China.
Expert export Package, perfect protection, length could reach to 5.995m, full loaded and minimized the waste space of 20GP and 40HQ container.
Production Process:
Aluminum ingot -> Aluminum Rod -> Homogeneous processing -> Extrusion->Aging Furnace->Anodizing->Electrophoresis
